EnergyPLAN teaching at other Universities

Here you can find a list of universities besides Aalborg University, that offer teaching in EnergyPLAN as part of their curricula.

Åland University of Applied Sciences

Contact

Dr. Florian Haug

About the Program:
As part of the master’s programme for Energy Automation Sustainable Engineering (EASE), students at Åland University of Applied Sciences and Arcada University of Applied Sciences use EnergyPLAN to study the transition towards 100% renewable energy systems.

Course name:
Renewable Energy Systems  – Design and Optimization

 

LUT University

Contact

Prof. Dr. Christian Breyer

About the program:
EnergyPLAN is included in energy-related Master degree programs at LUT University. These degree programs have renewable energy as a major and are typically linked to Electrical Engineering, Energy Technology, Sustainability Science, and Industrial Engineering. Aim for students is the design of a 100% renewable energy system for all energy demands with special focus on sector coupling, power-to-X, e-fuels, flexibility, high overall system efficiency, and low cost. This supports students in their learning on the opportunities of the energy transition in differentiated energy systems. Application cases are all round the world, typically on country-level, but also sub-national level, and often islands. Excellent students results are used for publications, such as for Scotland (link1), Bolivia (link2), and the Maldives (link3).

Course name: 
Energy Scenarios

 

Shanghai Jiao Tong University

Contact

Cheng Tung Chong

About the program:
EnergyPLAN is included in the study program of Energy and Power Engineering for Master students at China-UK Low Carbon College, Shanghai Jiao Tong University. It has been used for the design of smart energy systems to decarbonize the power sector, with emphasis on the integration of high-level renewable energy sources and environmental impact analysis. This equips the students with the necessary knowledge and skills to meet the China’s energy transition needs and carbon neutrality target.

Course name:
New Energy Systems

 

University of Electronic Science and Technology of China

Contact

Pro. Weihao Hu


About the program:
EnergyPLAN has been applied to the teaching course of “Renewable Energy Generation and Grid Connection”, which has been included in “Master of Electrical Engineering” and “Doctor of Control Science and Engineering”. Department of Electrical Engineering, School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China.

Course name:
Renewable Energy Generation and Grid Connection

 

Riga Technical University

Contact
Prof. Gatis Bazbauers

About the Program:
EnergyPLAN is used in the study program Environmental Engineering at Riga Technical University (Latvia) for bachelor, master, and PhD level student thesis work. It has been used for studies of 100% renewable energy systems, analysis of the optimal pathways for de-carbonization of transport and district heating systems, studies of the impact of electric vehicles on the load profile of power networks, vehicle-to-grid systems, and many other complex energy system analyses.  

Course name:
Socio-economic aspects of energy supply.

 

Queen's University Belfast

Contact

About the Program:
As part of the program on the Engineering of Energy, Economics and the Environment (E-cubed) students in the School of Mechanical & Aerospace Engineering at Queen’s University Belfast will use EnergyPLAN to analyse the energy systems of Ireland and the United Kingdom in order to support our net-zero by 2050 targets, UN Climate Change policies and the UN Sustainable Development Goals.

Course name:
“Renewable Energy Technology, Systems and Networks”

University of León

About the Program:
EnergyPLAN is included in the teaching program of “Mining Engineering and Energy Resources Master”, in the “Energy Engineering Degree” and in the  “Doctorate in Production Engineering and Computing. Department of Electrical, Systems and Automation Engineering, School of Industrial and Computer Engineering, University of León (Spain).

Course name:
“Energy Resources Management” as part of the “Mining Engineering and Energy Resources Master”, “Energy Technology” as part of “Energy Engineering Degree”, at the Faculty of Mining Engineering, University of León (Spain).

Leipzig University of Applied Sciences

About the Program:
As part of the master program for Energy, Building and Environmental Technology students at HTWK try achieving Germanys 2030 and 2050 (now 2045) climate goals based on a previously generated EnergyPLAN model for Germany 2015 (link).

Course name:
“Simulation of interconnected energy systems”

University of Utrecht

Contact

About the Program:
EnergyPLAN is included in the teaching program at the Copernicus Institute of Sustainable Development, Faculty of Geosciences, Utrecht University, The Netherlands.

Course name:
“Energy in the Context of Sustainability” in the master program “Energy Science”.

University of Zagreb

About the Program:
EnergyPLAN is included in the Energy Planning Methods at the Department of Energy, Power Engineering and Environment at Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb.

Course name:
“Energy Planning Methods”

University of Tehran

About the Program:
EnergyPLAN is included in the teaching of Energy modelling and Sustainable Energy Systems Research Lab, Department of Renewable Energy and Environmental Engineering, Faculty of New Sciences and Technologies, University of Tehran

Course name:
“Energy Modelling” course at the Faculty of New Sciences and Technologies, University of Tehran as a part of “Energy Systems Engineering” program.

Polytechnic University of Tirana

About the Program:
EnergyPLAN is included in the teaching program covering Energy Scenarios subject in “Energy Management Master of Science”, that is part of the Energy Department, Faculty of Mechanical Engineering, Polytechnic University of Tirana, Albania.

Course name:
Master of Sciences in “Energy Management”, part of Energy Department Master Programs, Faculty of Mechanical Engineering, Polytechnic University of Tirana, Albania

Ss. Cyril and Methodius University in Skopje

About the Program:
EnergyPLAN is included in the teaching program at the Institute of Thermal Engineering, Faculty of Mechanical Engineering Skopje, Ss. Cyril and Methodius University in Skopje, R.N. Macedonia

Course name:
“Modeling and simulation of energy systems” and “Renewable energy sources – Advanced level 1” part of the master programs “Energy and Environment” and “Thermal Engineering”

University of Belgrade

Contact

Asst. Professor Dr. Mileta Žarković

About the Program:
EnergyPLAN is included in the Energy Engineering Fundamentals at the Department of Power Systems, School of Electrical Engineering, University of Belgrade.

Course name:
“Energy Engineering Fundamentals”

University of Minho

Contact

Paula Varandas Ferreira

EEUM_logo_EN

About the Program:
EnergyPLAN is included in the MSc in Engineering and Industrial Management and in the MSc in Engineering and Operations Management, Department of Production and Systems, School of Engineering, University of Minho, Portugal. 

Course name:
“Energy Management”

University of Las Palmas de Gran Canaria

Contact

About the Program:
EnergyPLAN is using as part of various teaching programmes within the School of Industrial and Civil Engineering at the University of Las Palmas de Gran Canaria for modelling and designing diverse alternative scenarios for the Canary Islands. Specifically, it is employed in the Master of Renewable Energies and Energy Transition, the Master in Advanced Industrial Technologies and Processes, and the PhD Doctoral Programme in Chemical, Mechanical, and Manufacturing Engineering.

Course name:
“Smart Energy Systems” in the Master of Renewable Energies and Energy Transition; “Microgrids with Renewable, Isolated, and Interconnected Energies” in the Master in Advanced Industrial Technologies and Processes; “Wind Energy Utilisation: Wind Resource Analysis” in the PhD Doctoral Programme in Chemical, Mechanical, and Manufacturing Engineering